The working pressure of the hydraulic oil of the high-pressure diaphragm filter press is the key medium for transmitting the working pressure of the internal structure.

In the process of applying diaphragm filter press, the working pressure of hydraulic oil is the key medium for transmitting the working pressure of internal structure. Hydraulic oil can also directly affect the operation and operation of the equipment, and immediately reflect the actual effect. However, many people do not know the provisions of the application of hydraulic oil, often blindly follow the trend to select the measurement verification method, which not only endangers the long-term maintenance of the tube filter press, but also causes the damage and adhesion of the equipment.

The actual operation of the equipment of the diaphragm filter press requires oil as an aid. It may be lubrication or transmission. The hydraulic oil is the same as the diaphragm filter press, which can not only assist the dust removal equipment to be stronger and more stable, but also enable the dust removal equipment to operate. In order to prevent damage, the use of oil as a machine is critical. There are various types of hydraulic oil for diaphragm filter presses on the sales market. When selecting, everyone will select from the working pressure of the hydraulic transmission system. This is also reasonable, but not all the hydraulic oil required by the high-pressure system software. The more they are, the more attention should be paid to the basic principles and internal structure of the membrane filter press. Nowadays, diaphragm filter presses are usually sold immediately to talk about orders and introduce assisting hydraulic oil. The diaphragm filter press not only reduces the one-sidedness of customers who purchase hydraulic oil, but also enhances the actual effect of pairing, thereby improving the service life of the diaphragm filter press.

1, the mud pump and organic chemical liquid pump should be used to replace the centrifugal pump magnetic pump

The sludge discharge pump of the membrane filter press sludge treatment system software is applied to the slurry pump. During the whole operation process, the pump will not easily block the mortar or the pump will leak. During the operating period, it is usually necessary to clean and repair the pump. The task of the pump is also very large. Through technical exploration and specific operation experiments, it is found that the application of screw pump to transport silt has the advantages of stable total flow, stable working pressure and no leakage. After that, everyone also controlled the working frequency conversion of the magnetic pump, which in turn increased the total flow and working pressure of the silt. Digital control has created a good prerequisite for the smooth operation of the membrane filter press, and it is running well at this stage.

2. The filter belt adjustment equipment shall be equipped with anti-mud equipment

At the beginning of the tubular filter press, the filter belt often produces tensile strain, which often causes the filter belt to sink deep in the squeeze roller and destroy, thus greatly shortening the service life of the filter belt. After that, everyone's analysis found that the primary factor leading to the deviation of the filter belt was the common failure of the filter belt adjustment equipment. After assembling the anti-mud equipment on the tubular filter press, the problem of filter belt deviation was solved.